REGIONJETXAC1-CV1-CB2-10-02-0000-520A-D

Main Landing Gear Torque Links - Remove procedures

Issue number and type:	003	new
Issue Date:	2005-02-24
Security Classification:	Unclassified
Responsible partner company:	LBS/KA296
Originator:	LBS/KA296
QA Status:	The Data Module is an Unverified Draft
Applicability:

REFERENCES

Data Module	Title
REGIONJETXAC1-CV1-C12-45-01-000-152A-D	Maintenance - Pre Maintenance
REGIONJETXAC1-CV1-C12-45-02-000-152A-D	Electrical - Pre Maintenance
REGIONJETXAC1-CV1-CB2-00-00-0000-012A-D	Landing gear - General - General warnings and cautions and related safety data
REGIONJETXAC1-CV1-CB2-40-03-0000-520A-D	Main Landing Gear Brakes - Remove procedures

PRELIMINARY REQUIREMENTS

Required condition

Condition	Data Module/Technical Publication
This task must be done in a hangar or a hardened aircraft shelter
The aircraft must be safe for maintenance	REGIONJETXAC1-CV1-C12-45-01-000-152A-D
The aircraft must be electrically safe	REGIONJETXAC1-CV1-C12-45-02-000-152A-D

Required personnel

Person	Category	Skill	Trade	Time
Man a	TECHAFR	Basic		2.03h

Support equipment

Nomenclature	Identification No.	Qty
TORQUE WRENCH	NSN: 8928 999282982 Pt.No.: SP80030000 - NSCM: PT405	1
TOOL KIT	Pt.No.: TK-494DF-1 - NSCM: PT405	1

Consumables, materials and expendables

Nomenclature	Identification No.	Qty
PIN COTTER	Pt.No.: BACP10AD02C09P - NSCM: V5282	1
PIN COTTER	Pt.No.: BACP20BC01D07P - NSCM: V5282	1

Spares

No spares

Safety conditions

WARNING

Review the SAFETY PRECAUTIONS section data before performing this procedure REGIONJETXAC1-CV1-CB2-00-00-0000-012A-D .

PROCEDURE

(1)

NOTE

Procedures for the right and left components are the same. Only the procedures for the left are given.

(2) Perform the Main Landing Gear Brakes - Remove procedures REGIONJETXAC1-CV1-CB2-40-03-0000-520A-D.

(3) Remove the upper and lower torque link from the strut (Refer to Fig. 1 ):

1. Remove the screw (13), clamp (14) and nut (21) from the torque link standoff bracket (18).

2. Remove the cotter pins (16), nuts (15), washers (17), bolts (20), standoff bracket (18) and switch bracket (19) from the upper torque link (2).

3. Remove the nuts (12), washers (11), bolts (8) and the switch terminal bracket (9) from the lower torque link (7).

4. Remove the cotter pin (5), nut (4), washer (6) and bolt (10) from the torque links (2 and 7).

5. Remove the safety wire from each slotted spring pin (3). Remove the spring pin (3) and link pin (1) from the upper (2) and lower (7) torque links.

6. Remove the upper torque link (2) and lower torque link (7) from the strut and axle.

(4) Inspect the strut, pins and torque link bushings for damage.

REQUIREMENTS AFTER JOB COMPLETION


bolt (10)	locate	meta
bolt (10)	locate	meta
bolts (20)	locate	meta
bolts (20)	locate	meta
bolts (20)	locate	meta
bolts (20)	locate	meta
bolts (8)	locate	meta
bolts (8)	locate	meta
bolts (8)	locate	meta
bolts (8)	locate	meta
bushing	locate	meta
bushing	locate	meta
bushing	locate	meta
bushing	locate	meta
bushing	locate	meta
bushing	locate	meta
bushing	locate	meta
bushing	locate	meta
bushing	locate	meta
bushing	locate	meta
bushing	locate	meta
bushing	locate	meta
bushing	locate	meta
bushing	locate	meta
bushing	locate	meta
bushing	locate	meta
clamp (14)	locate	meta
clamp (14)	locate	meta
cotter pin (5)	locate	meta
cotter pin (5)	locate	meta
cotter pins (16)	locate	meta
cotter pins (16)	locate	meta
cotter pins (16)	locate	meta
cotter pins (16)	locate	meta
link pin (1)	locate	meta
link pin (1)	locate	meta
link pin (1)	locate	meta
link pin (1)	locate	meta
lower torque link (7)	locate	meta
lower torque link (7)	locate	meta
nut (21)	locate	meta
nut (21)	locate	meta
nut (4)	locate	meta
nut (4)	locate	meta
nuts (12)	locate	meta
nuts (12)	locate	meta
nuts (12)	locate	meta
nuts (12)	locate	meta
nuts (15)	locate	meta
nuts (15)	locate	meta
nuts (15)	locate	meta
nuts (15)	locate	meta
safety wire	locate	meta
safety wire	locate	meta
safety wire	locate	meta
safety wire	locate	meta
screw (13)	locate	meta
screw (13)	locate	meta
spring pin (3)	locate	meta
spring pin (3)	locate	meta
spring pin (3)	locate	meta
spring pin (3)	locate	meta
standoff bracket (18)	locate	meta
standoff bracket (18)	locate	meta
strut	locate	meta
strut	locate	meta
switch bracket (19)	locate	meta
switch bracket (19)	locate	meta
switch terminal bracket (9)	locate	meta
switch terminal bracket (9)	locate	meta
upper torque link (2)	locate	meta
upper torque link (2)	locate	meta
washer (6)	locate	meta
washer (6)	locate	meta
washers (11)	locate	meta
washers (11)	locate	meta
washers (11)	locate	meta
washers (11)	locate	meta
washers (17)	locate	meta
washers (17)	locate	meta
washers (17)	locate	meta
washers (17)	locate	meta

REGIONJETXAC1-CV1-CB2-10-02-0000-520A-D

Main Landing Gear Torque Links - Remove procedures

REFERENCES

PRELIMINARY REQUIREMENTS

Required condition

Required personnel

Support equipment

Consumables, materials and expendables

Spares

Safety conditions

PROCEDURE

REQUIREMENTS AFTER JOB COMPLETION

32.10.02. MAIN LANDING GEAR TORQUE LINKS REMOVAL

Step Clarifying Info (note)

Step 1. Remove main landing gear brake.

Step 2. Remove the clamp from the torque link standoff bracket.

Step 3. Remove standoff bracket and switch bracket from the upper torque link.

Step 4. Remove the switch terminal bracket from the lower torque link.

Step 5. Remove the cotter pin, nut, washer and bolt from the torque links.

Step 7. Remove the safety wires, spring pins and link pins from the upper and lower torque links.

Step 8. Remove the upper and lower torque link from the strut and axle.

Step 9. Inspect the strut, pins and torque link bushings for damage.

REGIONJETXAC1-CV1-CB2-10-02-0000-520A-DMain Landing Gear Torque Links - Remove procedures

REFERENCES

PRELIMINARY REQUIREMENTS

Required condition

Required personnel

Support equipment

Consumables, materials and expendables

Spares

Safety conditions

PROCEDURE

REQUIREMENTS AFTER JOB COMPLETION

32.10.02. MAIN LANDING GEAR TORQUE LINKS REMOVAL

Step Clarifying Info (note)

Step 1. Remove main landing gear brake.

Step 2. Remove the clamp from the torque link standoff bracket.

Step 3. Remove standoff bracket and switch bracket from the upper torque link.

Step 4. Remove the switch terminal bracket from the lower torque link.

Step 5. Remove the cotter pin, nut, washer and bolt from the torque links.

Step 7. Remove the safety wires, spring pins and link pins from the upper and lower torque links.

Step 8. Remove the upper and lower torque link from the strut and axle.

Step 9. Inspect the strut, pins and torque link bushings for damage.

REGIONJETXAC1-CV1-CB2-10-02-0000-520A-D

Main Landing Gear Torque Links - Remove procedures